Binary Pump

Configuration: Ultra-high-performance binary Infusion System (120Mpa), Ultra-high-performance binary Infusion System (62MPa, 90MPa)

Ultra-high-performance binary infusion system can be equipped with two types of infusion device:

Type I: Reciprocating infusion pumps, High flow accuracy, Low pressure pulsation

Type II: Linear motor digital-driven pump, Infusion stability, Mixing accuracy

Solvent type selection according to the mobile phase, and automatic adjustment of liquid compression compensation

Automatic post-column rinsing, the cleaning flow rate can be controlled according to actual needs

Quaternary Pump

Maximum pressure of the quaternary pump can reach to 70Mpa

Solvent type selection according to the mobile phase, and automatic adjustment of liquid compression compensation

Automatic post-column rinsing, the cleaning flow rate can be controlled according to actual needs

UV Detector

• The newly designed circuit system and light path structure greatly improve the sensitivity of the detector
• Optional: UV detector and ultra-efficient UV detector
• Usage of 2000 hours of high-performance deuterium lamp
• Front-loader flow cell and light path structure design, easy to maintain and replace
• Continuously perform spectral scanning or absorbance measurement under 2 wavelengths（EX1800 UV D）

PDA Detector

•  Spectral scanning or absorbance measurement can be performed continuously at a frequency of 100 Hz under 8 wavelengths
• The wavelength range is 200nm to 800nm, adjusted in 1nm increments
• Both deuterium lamp and tungsten lamp use built-in counter to calculate working time
• Support 3D spectrogram

FL Detector

• Use high-performance flash xenon light source
• With the newly designed optical system, achieved high sensitivity and fast analysis capabilities

ELS Detector

•  Super long life laser light source
• Special designed constant temperature device to ensure the stability of the evaporation temperature
• Built-in gas mass flow control system, not affected by pressure changes
• Special designed temperature-controlled atomizer to prevent instability caused by the atomization process

RI Detector

•  The dual temperature control system shortens the time from turning on the power switch to the stabilization of the instrument, and ensures good baseline stability
• Have a leak sensor

• Equipped with online vacuum deaerator
• Basically provides 4 degassing channels to achieve 4 mobile phase degassing
• Two-way mobile phase switching valve can be configured, to expand the original two-way mobile phase input of the binary high-pressure gradient to two sets of two (4 in total) mobile phase input
• Degassing channel Systec AF® – degassing channel volume is 380μL/channel

• Self-protection function, misoperation preventing, effectively reduce serious damage to equipment caused by misoperation
• The injection range is 0.1~120μL, ensuring high-precision injection of both large and small-volume samples
• Various optimization measures are adopted to reduce cross-contamination of samples
• Up to 330 (1mL) can be placed;
• Provides two options: standard and ultra-efficient
• Quadruple protection device, with optional: refrigeration function
• Programmable sampling program, sample pretreatment, automatic dilution, automatic pre-column derivatization and other functions

• Column Compartment Thermostatting and Preheating for Temperature to reduce temperature changes so that the chromatographic peak shape can be more symmetrical
• Large-capacity structure, convenient to place 4 x 30cm chromatographic columns or 8 x 5cm,10cm ultra-efficient columns
• With multi-channel switching valve, can achieve chromatographic column switching or multi-dimensional liquid phase applications